Horizontal Rope and Chain Range

Winches, Capstans and Windlasses for

SPECIFICATIONS

Model	HRC-10 - 10"	HRC-10 - 8"	HRC-6	HRC-8
Maximum Pull	850kg 1870lbs	700kg 1540lbs	270kg 600lbs	405kg 900lbs
Chain Short Link	10mm 3/8"	8mm 5/16"	6mm/7mm 1/4"	6mm/7mm/8mm 1/4" - 5/16"
Rope Size (Nylon)* (3 strand or 8 plait)**	16mm 5/8"	14mm-16mm 9/16" - 5/8"	12mm 1/2"	12mm/14mm 1/2" - 9/16"
Line Speed (Anchor retrieval nominal 30kg)			25m/min 81ft/min	33m/min 108ft/min
Power Supply (DC)	12V/24V	12V/24V	12V	12V/24V
Motor Power	1200W	1000W	400W	600W
Circuit Breaker			50Amp	70Amp
Net Weight (Electric)	20kg 44lbs	19kg 42lbs	11kg 24lbs	11.5kg 25lbs

* refer to owners manual for rope size variations
** 8 plait recommended

DIMENSIONS

Model	HRC10 (both models)	HRC6/HRC8
A	369mm 14 1/2"	260mm 10 1/4"
B	199mm 7 13/16"	150mm 5 29/32"
C	316mm 12 3/8"	197mm 7 3/4"
D	80mm 3 5/16"	120mm 4 23/32"
E	90mm 3 9/16"	250mm 9 7/8"
F	92mm 3 5/8"	77mm 3 1/16"
G	110mm 4 3/8"
H	80mm 3 5/16"
J	99mm 3 15/16"

Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.